 |
 |
| Step Twenty-one
Scrape the plate gently over waste receptacle. Use a steady motion as to avoid creating ridges on the surface. |
Step Twenty-two Assemble the finishing blade as shown in the picture and repeat step twenty-one with this assembly. |
 |
 |
| Step Twenty-three Use a nitrogen or air line to gently blow off excess silica dust under the fume hood. |
Step Twenty-four Place the plate in an oven set at 40-50oC for one hour just prior to use. |
| Part: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |